Chest Lock
Ref. #11-250C

1 Available
$30.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Chest Lock is used on  Blanket Chest or Tool Chest.  The keeper is placed on the lid of the chest and the lock is mortised (1 1/2" x 1 5/8" x 1/2") on the inside of the chest,  facing  to the outside of the chest. A hole is cut 7/8" down from the top and 5/8" from the sides in the chest to match the key hole center. The Lock measures 1 3/4" x 2 3/8" and is keyed, restored and ready to be installed.

Chest Lock
Ref. #11-44B

1 Available
$25.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Chest Lock is used on  Blanket Chest or Tool Chest.  The keeper is placed on the lid of the chest and the lock is mortised (1 3/4" x 1 7/8" x 1/4") on the inside of the chest,  facing  to the outside of the chest. A hole is cut 1 1 1/4" down from the top and 1 1/2" from the sides in the chest to match the key hole center. The Lock measures 2" x 2 7/8" and is keyed, restored and ready to be installed.

Cabinet or Drawer Lock
Ref. #11-220C

2 Available
Price: $10.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us

Cabinet or Drawer Locks are used on a Cabinet door or on a drawer.   They are mounted on the inside of a cabinet or a drawer, facing (as  pictured) to the outside,  a hole is cut to match the keyhole. The key hole center  is  7/8" from top of lock to the pin, 1 1/8" from right side to pin and 5/8" from left to pin.  It measures 1 3/4" from bolt edge to round edge x 1 3/4" wide. This lock must be installed in a dovetailed mortise (1 5/8" x 1 3/4" x  3/8"). The key handle may vary,  restored and ready to be installed.