Mowery Antiques

Chest & Cabinet Locks

Drawer Lock
Ref. #11-279

1 Available
Price: $10.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us

 

Drawer Lock measures 1 1/2" x 1 7/8"  It is mortised (1" x 1" x 1/4") and  mounted on the inside of a drawer (as pictured on the left).  A hole is cut thru to match the keyhole and it measures from the hole center to the top edge  5/8" x 3/4" on either side.   Restored with key and ready to be installed. Key handle may vary.

 

 

Chest Lock
Ref. #11-
295

1 Available
$25.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Chest Lock is used on  Blanket Chest or Tool Chest. and it measures 2" x 2 7/8"    The keeper is placed on the lid of the chest and the lock is mortised (1 5/8" x 1 3/4" x 3/8") on the inside of the chest .  A hole is cut thru to match the keyhole and it measures from the hole center to the top edge 1 1/8" x sides 1 1/2".   Restored with key and ready to be installed. Key handle may vary.

 

 

 

Drawer or Cabinet Lock
Ref. #11-296

1 Available
Price: $20.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us

 Drawer or cabinet Lock is  mounted on the inside of a drawer or a cabinet, facing (as pictured) to the outside,  a hole is cut to match the keyhole. The key hole center  is 1 1/8" from top of lock to the pin, 1 5/8" from left side to pin and 1 1/8" from right to pin.  It measures 2 5/8" from bolt edge to round edge x 2 5/8" wide. This lock must be installed in a dovetailed mortise (1 5/8" x 2 3/8" x 1/2"). The key handle may vary,  restored and ready to be installed.

 

 

 

Drawer or Cabinet Lock
Ref. #11-29
7

1 Available
Price: $20.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us

 Drawer or cabinet Lock is  mounted on the inside of a drawer or a cabinet, facing (as pictured) to the outside,  a hole is cut to match the keyhole. The key hole center  is 1 1/8" from top of lock to the pin, 1 1/8" from left side to pin and 7/8" from right to pin.  It measures 2 1/4" from bolt edge to round edge x 2 1/8" wide. This lock must be installed in a dovetailed mortise (2 1/8" x 1 7/8" x 3/8"). The key handle may vary,  restored and ready to be installed.

BACK

   HOME PAGE    FURNITURE HARDWARE   FURNITURE LOCKS