Mowery Antiques

Chest & Cabinet Locks

Drawer Lock
Ref. #11-68

2 Available
Price: $25.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us

 Drawer Locks are  mounted on the inside of a drawer, facing (as pictured) to the outside,  a hole is cut to match the keyhole. The key hole center  is 1 1/4" from top of lock to the pin.  It measures 2 1/4"  x 2 3/4" wide. This lock must be installed in a  mortise (1 3/4" x 1 3/4" x 3/8"). The key handle may vary,  restored and ready to be installed.

 

 

Early Cabinet Door Lock
Ref. #11-276

1 Available
Price: $25.00

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

This Lock is used on a Cabinet or Wardrobe door.   It is mounted on the inside of the door, facing (as pictured on left) to the outside, and  a hole is cut thru to match the keyhole.   This lock measures  3 1/8" x 2".  The key hole center from the top of the lock is 2" and from the bolted side it is 7/8". This lock is keyed, restored and ready to be installed.

 

 

 

Chest Lock
Ref. #11-250B

1 Available
$30.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Chest Lock is used on  Blanket Chest or Tool Chest.  The keeper is placed on the lid of the chest and the lock is mortised (1 1/2" x 1 1/2" x 1/2") on the inside of the chest,  facing  to the outside of the chest. A hole is cut 7/8" down from the top and 5/8" from the sides in the chest to match the key hole center. The Lock measures 1 5/8" x 2 3/8" and is keyed, restored and ready to be installed.

 

 

Early Cabinet Door Lock
Ref. #11-197

1 Available
Price: $25.00

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

This Lock is used on a Cabinet or Wardrobe door.   It is mounted on the inside of the door, facing (as pictured on right) to the outside, and  a hole is cut thru to match the keyhole.   This lock measures  3 3/8" x 1 3/4".  The key hole center from the top of the lock is 2" and from either side it is 7/8". This lock is keyed, restored and ready to be installed.

 

 

Early Cabinet Door Lock
Ref. #11-277B

1 Available
Price: $25.00

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

This Lock is used on a Cabinet or Wardrobe door.   It is mounted on the inside of the door, facing (as the 2nd Lock pictured on right) to the outside, and  a hole is cut thru to match the keyhole.   This lock measures  2 7/8" x 1 1/2".  The key hole center from the top of the lock is 1 5/8" and from either side it is 3/4". This lock is keyed, restored and ready to be installed.

 

 

 

Cupboard or Drawer Lock
Ref. #11-67B

1 Available
Price: $10.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us

Cupboard or Drawer Locks are used on a Cupboard door  or on a drawer.   They are mounted on the inside of a cupboard or a drawer, facing (as the bottom one pictured) to the outside,  a hole is cut to match the keyhole. The key hole center  is  7/8" from top of lock to the pin, 1 1/8" from right side to pin and 5/8" from left to pin.  It measures 1 7/8" from bolt edge to round edge x 1 3/4" wide. This lock must be installed in a dovetailed mortise (1 3/8" x 1 3/4" x 1/4"). The key handle may vary,  restored and ready to be installed.

 

 

Early Cabinet Door Lock
Ref. #11-144D

1 Available
Price: $25.00

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Early Cabinet Door Lock, it is mounted on the inside of the cabinet door and a hole is cut in the door to match the key hole (hole center top 1 3/4" x edge 3/4") .  The lock measures 3" x 1 3/4".   It is restored  and ready to be installed.

 

 

Chest Lock
Ref. #11-
210

1 Available
Price: $25.00 each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Chest Lock is used on  Blanket Chest or Tool Chest.  The keeper is placed on the lid of the chest and the lock is mortised (1 3/8" x 1 1/2" x 1/4") on the inside of the chest,  facing  to the outside of the chest. A hole is cut 7/8" down from the top in the chest to match the key hole center. The Lock measures 1 5/8" x 2 1/2" and is keyed, restored and ready to be installed.


BACK NEXT

  HOME PAGE    FURNITURE HARDWARE   FURNITURE LOCKS