Mowery Antiques

Chest & Cabinet Locks

Drawer or Door Lock
Ref. #11-32

3 Available
Price: $8.00

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Drawer or Door  Lock is mortised in the edge of a drawer or door.  The  mortised is (1 1/2" x 1" x 3/8") in an oval shape.  A hole is cut to match the keyhole and the hole center is 5/8" from top of lock to the pin. The Lock measures 1 1/2" long x 3/8" wide. The key handle may vary, restored and ready to be installed.

Quantity:


Victorian Cabinet Door Lock
Ref. #11-34

1 Available
$22.00

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us..

Victorian Bronze Cabinet Door Lock, it is mounted on the inside of the cabinet door and a hole is cut in the door to match the key hole.  The lock measures 3 1/2" x 1 3/4" and it is reversible. Restored with key and ready to be installed.

Quantity:


Cupboard or Drawer Lock
Ref. #11-41

1 Available
Price: $10.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Cupboard or Drawer Lock are used on a Cupboard door or on a drawer .   They are mounted on the inside of a cupboard or a drawer, facing (as pictured) to the outside, and  a hole is cut thru to match the keyhole. They measure 2 5/8"  x 2 3/8" with a brass end. These locks must be mortised into the back of the drawer or door (2 1/8" x 1 3/8" x 3/8").  They are keyed, restored and ready to be installed.

Quantity:


Cupboard Door or Drawer Lock
Ref. #11-5B

2 Available
Price: $9.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us

Cupboard Door or Drawer Locks are used on a Cupboard door as shown in the first position or on a drawer as shown in second position.   They are mounted on the inside of a cupboard or a drawer, facing (as pictured) to the outside, and  a hole is cut to match the keyhole. It measures 1 7/8" from bolt edge to round edge x 1 7/8". This lock must be installed in a dovetailed mortise (1 7/8" x 1 3/8" x 3/8"). The  key handle may vary, restored and ready to be installed.

Quantity:

cheslock43.JPG (13738 bytes)

 


Chest Lock
Ref. #11-242

1 Available
$50.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Chest Lock is used on  Blanket Chest or Tool Chest.  The keeper is placed on the top of the lid of the chest and the lock is surface mounted  mortise (1" x 1 1/8" x 3/16") facing (as pictured on right).  When key is turned it releases the keeper and you can open the chest.   The Lock measures 1 1/2" x 1 3/4" and is keyed, restored and ready to be installed.

Quantity:


Chest Lock
Ref. #11-240

1 Available
Price: $65.00

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Chest Lock is used on  Blanket Chest or Tool Chest.  The keeper is placed on the top of the lid of the chest and the lock is surface mounted  mortise (1 3/4" x 2 3/8" x 1/2") facing (as pictured on left) on the outside of the chest. The Lock measures 3 3/8" x 4 1/2" and is keyed, restored and ready to be installed.

Quantity:

 

Chest Lock
Ref. #11-263

1 Available
Price: $25.00 Each

NOTE: Sale of this item is not complete until you receive a  confirmation and shipping total from us.

Chest Lock is used on  Blanket Chest or Tool Chest.  The keeper is placed on the lid of the chest and the lock is mortised (1" x 1 1/8" x 1/8") on the inside of the chest,  facing (as pictured on left) to the outside of the chest. A hole is cut 5/8" down from the top in the chest to match the key hole center. The Lock measures 1 1/8" x 1 3/4" and is keyed, restored and ready to be installed.

Quantity:

 

 

 

 BACK   NEXT

 HOME PAGE   FURNITURE HARDWARE    CHEST LOCKS